Shree Ram Pump & Pipe

1.00 HP BLU Self Priming Pump Sharp

Pumps that are partially or completely above the fluid level allow air into the suction line, which must be evacuated or displaced before the pump can move the liquid. Self-priming pumps are capable of removing air at startup before beginning its normal pumping functions.

To avoid the mixing of air and water, self-priming pumps create a partial vacuum to discharge water while also evacuating any air. It does this by combining the air and water during the priming process, forcing the air to rise and the water to sink or go down. Gravity then pulls the air-free water back into the impeller, where it mixes with the remaining air in the suction line.

This process repeats until all air is evacuated and a vacuum forms in the suction line. Once this happens, atmospheric pressure forces the water into the suction line and towards the impeller to allow pumping to begin.

 

Specifications : 

  • Wide range of pumps for appropriate selection as per requirement.
  • Uniquely designed various are available in each rating to satisfy individual’s need.
  • Suitable in wide voltage variation with greater performance.
  • Winding is safe due to built in thermal overload protector.
  • Class B insulation to resist in case of excessive heating.
  • High quality bearings are used for smooth running and long life.
  • Stamping are used of high quality electric grade for better efficiency.
  • Capacitor start and run motor having high ele. grade aluminum pressure dies casted rotor for trouble free operation.
  • Anti corrosive stainless steel shaft for years of commissioning.
  • Enduring leakage proof operation due to mechanical seal having high quality carbon Vs ceramic face. Better aesthetics with compact design.
  • Easy maintenance with interchangeable spare parts.
  • All components are machined on CNC machines with very close tolerances which reduces noise, vibrations, wearing, current heat ultimately increase product life.
  • Full proof design for minimum maintenance and consistency in performance.
  • Low power consumption with respect to performance.

 

 

 

MOC :

  • CI Body
  • Power Range (for 1ph & 3 ph) : 0.5 HP to 1 HP
  • Power Supply (for 1ph) : 230 Volts (+6% /-15%), 1-ph, AC, 50 Hz (+3%)
  • Power Supply (for 3ph) : 415 Volts (+6% /-15%), 3-ph, AC, 50 Hz (+3%)
  • Total Head : Up to 50 mtrs
  • Flow Rate : Up to 6600 Iph
  • Pipe Size : 15x15 to 25x25 mm
  • Pole / Syn. Speed : 2 Pole / 3000 rpm
  • Direction of Rotation : Anti clock Wise when viewed from front Side
  • Motor Detail : SCR, TEFC Induction motor, Duty-S1, Class of Insulation “B”
  • Max. Ambient Temperature : 40 C
  • Pumping Liquid       : Clear Cold Water

 

Applications :

  • Water lifting of Overhead Water Tank Filling
  • Domestic / Home Pressure Boosting Applications
  • Gardening, Four-Wheeler / Two-Wheeler Washing
  • Water supply to establishments like Malls, Complexes, Hospitals, Hotels

Application

More Like This